The Next Generation of Lamp Crushing

| July 21, 2016

Air Cycle Bulb EaterBulb Eater® 3 Lamp Crusher
with Intelli Technology®

Eliminate storage hassles – Reduce your needed storage space for lamps by crushing up to 1350 T8 4′ lamps per 55-gallon drum (The Bulb Eater® lamp crusher crushes all length lamps, see a picture to better visualize size reduction).

Reduce handling – Handle your spent bulbs once. Simply roll your Bulb Eater® lamp crushing system on a 55-gallon drum dollie (sold separately) to the work area or into a storage area. Save roughly 20 hours of labor per 1000 lamps by crushing rather than boxing the lamps!

Safer work environment – EPA studies show an estimated 2-3% accidental breakage rate while boxing lamps prior to pickup. The 0.001% emission rate from the Bulb Eater® lamp crushing system provides for less mercury vapor emission. Your workers are not only safer, but your liability is reduced!

Cut costs – By pre-crushing the lamps, facilities are able to save money on their lamp recycling costs. Savings are typically anywhere from a dime to $1 per lamp!

Nationwide recycling program – Enjoy “special” discounted national rates for lamp recycling. Fully permitted trucks are used for transportation and Certificates of Recycling are provided once the lamps are recycled.

Quick Facts

  • Single model capable of crushing straight linear lamps of any length, u-tubes, & CFL’s
  • Crushes a 4-foot fluorescent lamp in less than 1 second
  • Reduce labor by up to 20 hours per 1,000 lamps
  • Save up to 50% on recycling costs
  • Minimize storage space by up to 80% with lamp crusher
  • The most fun you can have disposing of lamps!

Special Features:

  • 5 stage filter system
  • On Board controls with Intelli Technology
    • Additional sensing points that assists with machine diagnostics and maintenance/filter change-outs
    • LCD display that displays which mode the machine is in and any defaults that might occur
  • Currently over 10,000 Bulb Eaters in use worldwide
  • CFL/U-Tube Chute now available! Call for More information

The Bulb Eater® 3 is the next generation of Bulb Eater® Lamp Crusher which crushes spent fluorescent lamps of any length into 100% recyclable material while capturing over 99.99% of the vapors released. The system, which is mounted onto a 55-gallon container, can hold up to 1359 4-foot fluorescent lamps

The Bulb Eater® 3 lamp crusher unit is equipped with a side-mounted dust filter unit containing the highest quality HEPA filter available. This works in conjunction with an activated carbon filter located in a steel canister. The activated carbon filter actively captures and neutralized the mercury vapor released from the lamps during crushing. A recent study showed non-detectable levels of escaped mercury vapor even after crushing 1500 lamps (Bulb Eater® 3 Air Emissions Report). The Bulb Eater® 3 features a new 5 stage filter system, a digital control with LCD display, self-diagnostic fault codes, and a higher motor speed for increased lamp waste per drum.

In addition to providing OSHA and ACGIH compliance, the Bulb Eater® 3 lamp crusher frees up valuable storage space normally filled with boxes of spent whole lamps, reduces handling and related labor costs, and typically cuts recycling costs by 50% or more.

Air Cycle BulbEater3-logoJoin Over 12,000 satisfied Bulb Eater® owners worldwide:
www.BulbEaterSolutions.com
1.800.909.9709

Print Friendly

Tags:

Category: Featured Product